3dEPP EPP Yak 55 Panduan Perakitan - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Mainan 3dEPP EPP Yak 55. 3dEPP EPP Yak 55 19 halaman.

16. Glue aileron servo with horn located towards the rear of aircraft. Glue servo in place

with hot glue a small amount on the mounting tabs of the servo case is sufficient.

17. Next locate the 10mm motor mount supplied with the kit. Lightly sand the surface of

the motor mount to insure a good bond between the motor mount and the foam. Test

fit the mount before gluing in position. Place a small amount of glue on each of the four

sides of the motor mount and spread evenly along the mount. Carefully but quickly

slide the mount into place making sure the screw is located on the bottom side. Make

sure the upper and lower fuselage and the forward horizontal motor mount foam are

aligned with the plastic motor mount.