3DHS SLICK 580 Montageanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Montageanleitung für Spielzeug 3DHS SLICK 580 herunter. 3DHS SLICK 580 16 Seiten.

1. Locate the 2 wing panels with ailerons as well as the 2 G10 aileron control

horns. Remove the ailerons from the wing and remove the covering over the

slot for the aileron horn on the bottom of the aileron with a sharp hobby

blade. Make sure you are doing this on the bottom of the aileron!

2. Scuff the portion of the control horn that will be glued into the aileron with

sandpaper. Use a glue tip on your bottle of medium CA and apply glue to the

slot as well as to both sides of the control horn. Insert the control horn into

the slot and make sure it seats properly against the surface of the aileron.