3DHS SLICK 580 조립 설명서 - 페이지 5

{카테고리_이름} 3DHS SLICK 580에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DHS SLICK 580 16 페이지.

1. Locate the 2 wing panels with ailerons as well as the 2 G10 aileron control
horns. Remove the ailerons from the wing and remove the covering over the
slot for the aileron horn on the bottom of the aileron with a sharp hobby
blade. Make sure you are doing this on the bottom of the aileron!
2. Scuff the portion of the control horn that will be glued into the aileron with
sandpaper. Use a glue tip on your bottle of medium CA and apply glue to the
slot as well as to both sides of the control horn. Insert the control horn into
the slot and make sure it seats properly against the surface of the aileron.
5