3DHS SLICK 580 조립 설명서 - 페이지 6

{카테고리_이름} 3DHS SLICK 580에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DHS SLICK 580 16 페이지.

3. Remove the covering from the aileron servo location and install the servo

using the manufacturer supplied mounting hardware with the output spline

toward the leading edge of the wing.

4. Slide the aileron into position on the hinges and secure with several drops

of fresh thin CA. This process is much easier and more effective if a fine glue

tip is used. Make sure to deflect the surface as pictured while applying the

CA.