3DHS SLICK 580 Panduan Perakitan - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Mainan 3DHS SLICK 580. 3DHS SLICK 580 16 halaman.

3. Remove the covering from the aileron servo location and install the servo

using the manufacturer supplied mounting hardware with the output spline

toward the leading edge of the wing.

4. Slide the aileron into position on the hinges and secure with several drops

of fresh thin CA. This process is much easier and more effective if a fine glue

tip is used. Make sure to deflect the surface as pictured while applying the

CA.