3DLabPrint Focke-Wulf Ta 152 C Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Spielzeug 3DLabPrint Focke-Wulf Ta 152 C herunter. 3DLabPrint Focke-Wulf Ta 152 C 9 Seiten. Fully 3d printable upgrade to short wing
Seite druckenUse power by your skill !
Our inovative motor holder can be used with various motors. Every motor should fit at
universal printed holder with alluminium cross or 16 x 19 or 25 x 19 (new in this update)
printed holder. Insert the complete assembly inside the slot in position you need and glue it
.
ACES performance setup - (530W)
Motor:
DYS D4215 650KV (for 6S setup)
ESC:
CastleCreation Talon 25A / 6S or similar
Propeller:
two blade Aeronaut CAM Carbon Light 9 x 6 or APC Electro 9 x 5,5
Battery:
Li-Pol TATTU GensAce 1500mAh 75C 6S1P Battery Pack
printed PET motor mount 25x19mm or universal with alluminium cross mount
OFFICER normal setup - (440W)
Motor:
EMAX MT 3510 600KV (for 6S setup)
AX-4008Q 620KV (for 6S setup, motor is discontinued
ESC:
YEP 40A/6S
Propeller:
two blade APC electro 9 x 5,5 or Aeronaut CAM Carbon Light 9 x 6
Battery:
Li-Pol 1500mAh 6S1P Battery Pack
printed PET universal motor mount with alluminium cross mount
ROOKIE setup - (240W)
Motor:
Leopard LC2830 980KV (for 3S setup)
ESC:
Turnigy 20A / 3S
Propeller:
two blade GWS 9 x 7,5 (ugly orange)
Battery:
LiPol 1300mAh / 3s
printed PLA mount 16 x 19 mm
(budget setup for LW hybrid version only)
... print your plane | www.3DLabPrint.com
- use it from your old planes)
or CastleCreation Talon 25A / 6S or similar
or similar
page
8