3DLabPrint Focke-Wulf Ta 152 C User Manual - Page 8

Browse online or download pdf User Manual for Toy 3DLabPrint Focke-Wulf Ta 152 C. 3DLabPrint Focke-Wulf Ta 152 C 9 pages. Fully 3d printable upgrade to short wing

Print Page

Use power by your skill !

Our inovative motor holder can be used with various motors. Every motor should fit at

universal printed holder with alluminium cross or 16 x 19 or 25 x 19 (new in this update)

printed holder. Insert the complete assembly inside the slot in position you need and glue it

ACES performance setup - (530W)

Motor:

DYS D4215 650KV (for 6S setup)

ESC:

CastleCreation Talon 25A / 6S or similar

Propeller:

two blade Aeronaut CAM Carbon Light 9 x 6 or APC Electro 9 x 5,5

Battery:

Li-Pol TATTU GensAce 1500mAh 75C 6S1P Battery Pack

printed PET motor mount 25x19mm or universal with alluminium cross mount

OFFICER normal setup - (440W)

Motor:

EMAX MT 3510 600KV (for 6S setup)

AX-4008Q 620KV (for 6S setup, motor is discontinued

ESC:

YEP 40A/6S

Propeller:

two blade APC electro 9 x 5,5 or Aeronaut CAM Carbon Light 9 x 6

Battery:

Li-Pol 1500mAh 6S1P Battery Pack

printed PET universal motor mount with alluminium cross mount

ROOKIE setup - (240W)

Motor:

Leopard LC2830 980KV (for 3S setup)

ESC:

Turnigy 20A / 3S

Propeller:

two blade GWS 9 x 7,5 (ugly orange)

Battery:

LiPol 1300mAh / 3s

printed PLA mount 16 x 19 mm

(budget setup for LW hybrid version only)

... print your plane | www.3DLabPrint.com

- use it from your old planes)

or CastleCreation Talon 25A / 6S or similar

or similar

page