Alto SB Tandem Betriebsanleitung - Seite 11

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Staubsauger Alto SB Tandem herunter. Alto SB Tandem 17 Seiten. Self service vacuum cleaner
Auch für Alto SB Tandem: Betriebsanleitung (12 seiten), (Polnisch) Benutzerhandbuch (12 seiten)

Seite drucken

FITTING THE

CONNECTING

ELBOW, HOSE

HOLDER AND

CREVICE NOZZLE

•

Fit the adapter ring

(Fig. 1, No. 8) over the

connection on the dirt

tank.

NOTE!

The connecting elbow

opening should point

upwards.

(Fig. 5)

•

Screw adapter fitting

(Fig. 6, Item 2) approx.

35 mm onto suction

hose (Fig. 6, Item 1).

Plug adapter fitting

with suction hose into

connecting elbow (Fig.

6, Item 3).

NOTE!

Push the suction hose

into the housing only

far enough that the

suction unit can still

swing freely when the

suction hose is

connected. This is

important so that the

suction unit fits air-

tight onto the dirt

tank when lowered.

•

Secure the suction

hose with the metal

bracket.

(Fig. 7).

•

Secure the hose

bracket to the suction

hose approx. 1.30 m

from the end of the

hose. (Fig. 8).

•

Remove screw from

clamping piece and

detach rope end.

Guide the rope

through the eye at

the hose holder. Hook

up rope end to

clamping piece and

secure with screw.

(Fig. 9). . . . .

•

Screw the crevice

nozzle onto the end

of the hose (left-hand

thread).

OPTIONAL

ACCESSORIES

Hose holder

It is also possible to

operate the SB Station

without the hose

retractor.

Secure the hose holder to

the existing bores with

screws.

After work, the hose is

simply placed into the

hose holder. (Fig. 10).

Art. No.

43064

CAUTION!

Either the hose holder

or the hose bracket

should be installed as

otherwise the suction

hose handling is

restricted.

Electronic coin tester

Allows the SB Station to

be operated with different

coins.

On request.

STARTING

OPERATION

•

Place the dirt tank into

the station and lower

the suction unit.

•

Fit the suction hose

with the adapter ring

over the connection of

the dirt tank.

Open the cover for the

coin tester tube:

•

Pull the knob and turn

through 90° - the

cover can now be

opened (Fig. 11).

•

Pull up the cover until

it is horizontal and

secure with the flap

holder (Fig. 12).

•

Set the desired

running time per coin

at rotary knob 1 of the

timer. (Fig. 13):

1 = 1 minute

10 = 10 minutes

(Rotary knobs 2-4 are

required only with

electronic coin tester)

Close the cover for the

coin tester tube:

•

Push down the cover

and turn the knob

through 90° - the

latching pin engages.

(Continued -->)