3DUpFitters 3D Printer Carbon Air Filter Installationshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installationshandbuch für 3D-Drucker 3DUpFitters 3D Printer Carbon Air Filter herunter. 3DUpFitters 3D Printer Carbon Air Filter 8 Seiten. Carbon air filter/vent adapter

Seite drucken

The Prusa/Ender setup is a bit more complicated since window inserts are all 4", while the

hose we recommend is 3". This setup adds an 3"->4" hose adapter, and the 3" hose is small

and doesn't overwhelm the small enclosure. Note that with this setup you need 2 3" clamps

and 1 4" clamp.

To complete venting to the outside you can ﬁnd

online or at most hardware stores. This can be connected to the outside using the same

techniques you'd use for a clothes dryer, or you can purchase one of the many compatible

window-venting

kits. These items are not included and must be purchased separately. We

don't bother to stock them since they're readily available at local hardware stores.

The fan can either be plugged into a USB power supply (not included) or the wires stripped and

connected directly into some models of 3D printer.

ﬂexible 4" dryer duct hoses

ﬂexible 3" hoses