3DUpFitters Artillery Sidewinder X1 Enclosure Kit Installationshandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationshandbuch für 3D-Drucker 3DUpFitters Artillery Sidewinder X1 Enclosure Kit herunter. 3DUpFitters Artillery Sidewinder X1 Enclosure Kit 13 Seiten.

Seite drucken

On the back of the enclosure is a grommet and grommet

holder. This makes it easy to take oﬀ the enclosure without

unplugging the printer.

First insert the grommet into the grommet holder, then run

the power supply cable through it. for easy access to the

extruder. The entire assembly then slips into the similarly

shaped opening in the left-side acrylic.

If assembling the Charcoal Air Filter, conﬁrm the direction of the

fan's air ﬁlter to pull air OUT of the enclosure and INTO the ﬁlter

by plugging it into a USB power supply. Attach using M4 cap

head 30mm or 40mm screws depending on the depth of the

particular fan.

4. Top Panel

Attach the top of the enclosure using M4 10mm screws.

The top has a front and back, so be sure to arrange the top

so that the slit is to the front.