Division 6 Dual Mini Sequencer Betriebsanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Synthesizer Division 6 Dual Mini Sequencer herunter. Division 6 Dual Mini Sequencer 14 Seiten.
Seite drucken
Selecting a Song
If the entire row of black keys is lit while displaying SONG/SEQUENCE SELECT, you are in SONG
mode.
The sequencer has 5 song memories available, which can be used to string together up to 16
sequences in any order. Each song step contains one sequence. When running and the current
sequence has completed, the sequencer will advance to the next song step and play the
sequence it contains.
To select a song (and switch to SONG mode), press the black not key that corresponds to the
song you want to play. If the sequencer is running, the newly-selected song LED will flash until
the sequencer reaches the end of all the sequences in the current song (or on the next clock;
see CHANGE ON CLOCK mode), then it will switch to the new song.
Another way to select a song, even while the display is in another mode, is to hold down the
PROG/RESET button then press the desired song button. The display will automatically change
to SONG/SEQUENCE SELECT mode.
Programming a Sequence
Programming a sequence hasn't changed much since v1. Whichever sequence you have
selected is the one you are modifying when you enter PROGRAM mode (steady STEP LED) (See
above for basics). There are, however, a few additional options...
SLUR
Rests still work like in v1; when the sequencer gets to a REST step, it keeps the CV OUT the same
and doesn't fire the gate. You can also make a step a SLUR, where it changes the CV OUT to a
new note but still doesn't fire the gate.