Division 6 Dual Mini Sequencer Manual de Instruções - Página 7

Procurar online ou descarregar pdf Manual de Instruções para Sintetizador Division 6 Dual Mini Sequencer. Division 6 Dual Mini Sequencer 14 páginas.

Selecting a Song

If the entire row of black keys is lit while displaying SONG/SEQUENCE SELECT, you are in SONG

mode.

The sequencer has 5 song memories available, which can be used to string together up to 16

sequences in any order. Each song step contains one sequence. When running and the current

sequence has completed, the sequencer will advance to the next song step and play the

sequence it contains.

To select a song (and switch to SONG mode), press the black not key that corresponds to the

song you want to play. If the sequencer is running, the newly-selected song LED will flash until

the sequencer reaches the end of all the sequences in the current song (or on the next clock;

see CHANGE ON CLOCK mode), then it will switch to the new song.

Another way to select a song, even while the display is in another mode, is to hold down the

PROG/RESET button then press the desired song button. The display will automatically change

to SONG/SEQUENCE SELECT mode.

Programming a Sequence

Programming a sequence hasn't changed much since v1. Whichever sequence you have

selected is the one you are modifying when you enter PROGRAM mode (steady STEP LED) (See

above for basics). There are, however, a few additional options...

SLUR

Rests still work like in v1; when the sequencer gets to a REST step, it keeps the CV OUT the same

and doesn't fire the gate. You can also make a step a SLUR, where it changes the CV OUT to a

new note but still doesn't fire the gate.