ESI ESRTD3 Installationsanleitung Handbuch - Seite 9
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Thermostat ESI ESRTD3 herunter. ESI ESRTD3 12 Seiten. Digital room thermostat with tpi & delayed start
Auch für ESI ESRTD3: Benutzer- und Installationshandbuch (20 seiten), Gebrauchsanweisung (8 seiten)
Seite drucken
1.5m
Mounting the Digital Room Thermostat
1. Position the Thermostat about 1.5m above floor
level, in a location where the thermostat is accessible,
reasonably lit and free from extremes of temperature
and draughts. Do not position the thermostat near
sources of heat, such as radiators, lights, TV, direct
sunlight or on an outside wall.
2. Loosen the screws on the back-plate and remove from
the thermostat.
3. Fix the back-plate, terminals at the top, either directly
onto a flat wall using wall plugs and screws or on a flush
mounting single conduit box. Route the wires through
the back of the thermostat and fit the wires to the wall-
plate in accordance with the relevant diagram shown
overleaf and in accordance with I.E.E. regulations
4. Select personal options by referring to DIP switch menu
(See page 10).
5. Fit the thermostat onto back-plate, and tighten the
screws.
6. Ensure an appropriate fuse is fitted to the circuit before
reconnecting to the mains supply (3 Amp usually).
9