ESI ESRTD3 Panduan Petunjuk Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Termostat ESI ESRTD3. ESI ESRTD3 12 halaman. Digital room thermostat with tpi & delayed start
Juga untuk ESI ESRTD3: Panduan Petunjuk Pengguna dan Instalasi (20 halaman), Petunjuk Pengguna (8 halaman)

Halaman Cetak

1.5m

Mounting the Digital Room Thermostat

1. Position the Thermostat about 1.5m above floor

level, in a location where the thermostat is accessible,

reasonably lit and free from extremes of temperature

and draughts. Do not position the thermostat near

sources of heat, such as radiators, lights, TV, direct

sunlight or on an outside wall.

2. Loosen the screws on the back-plate and remove from

the thermostat.

3. Fix the back-plate, terminals at the top, either directly

onto a flat wall using wall plugs and screws or on a flush

mounting single conduit box. Route the wires through

the back of the thermostat and fit the wires to the wall-

plate in accordance with the relevant diagram shown

overleaf and in accordance with I.E.E. regulations

4. Select personal options by referring to DIP switch menu

(See page 10).

5. Fit the thermostat onto back-plate, and tighten the

screws.

6. Ensure an appropriate fuse is fitted to the circuit before

reconnecting to the mains supply (3 Amp usually).