1 BY ONE Audio-Technica AT3600 Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Drehscheibe 1 BY ONE Audio-Technica AT3600 herunter. 1 BY ONE Audio-Technica AT3600 14 Seiten. Belt drive turntable with built in speakers

Seite drucken

Windows 10:

• The Recording Device is set to the USB device (in this case the device name, but often

called or including the phrase "USB Audio CODEC").

• Recording Channels is set to stereo.

• The Playback Device is set to the named speakers of the built-in computer sound

device.

• These settings can also be changed in Devices Preferences.

Windows calls most USB external devices "microphones". Some higher-end USB

recording interfaces may appear as their explicit manufacturer's name.

3. Software Playthrough

Use Transport > Transport Options > Software Playthrough (on/o ) and click

"Software Playthrough" to turn it "on" (the checkmark is shown when it is "on").

This setting can also be enabled or disabled in Recording Preferences. Software

Playthrough lets you hear the turntable through the computer speakers when

ecording. It also lets you hear the turntable without recording if you turn on

monitoring (see the next section below).

4. Monitoring

Enable monitoring to set the recording level

Turn monitoring on by clicking once on the microphone icon in the Recording Meter.

• In Mixer Toolbar, turn up the left-hand playback volume slider (by the speaker icon).

• The right-hand recording volume slider (by the microphone icon) can often be used to

vary the loudness of the recording, but it may not function with all turntables. If it does

not, try adjusting the output level on the turntable (often, there is a gain control under

the chassis).

Alternatively, you may be able to adjust the input level on Windows and Linux only,

usually by looking for the speaker icon by the system clock. On Windows, right-click

over the speaker icon > "Recording Devices". Then right-click over USB Audio Codec,

choose "Properties" and click the Levels tab.

• Try to aim for a maximum peak of around –6 dB, which corresponds to around 0.5 on

the waveform. You can always boost the level later with E ect > Amplify... or E ect

> Normalize... after you have completed editing.

5. Recording

Then, ignoring any instructions in the manufacturer's guide to select "stereo mix",

simply press the Record button

in Transport Toolbar to start recording from the

turntable.

6. Recording, editing and exporting

Once your USB turntable is set up and working properly, go to the Basic Recording,

Editing and Exporting section of Audacity's Tutorial - Copying tapes, LPs or

MiniDiscs to CD for instructions on how to:

• make and edit your recording

• export it to an audio ﬁle

• import it to iTunes or Windows Media Player

• burn it to CD

Audacity's reference links:

• Basic Recording, Editing and Exporting : https://manual.audacityteam.org/man/

basic_recording_editing_and_exporting.html

• Tutorial - Copying tapes, LPs or MiniDiscs to CD : https://

manual.audacityteam.org/man/tutorial_copying_tapes_lps_or_minidiscs_to_cd.html

Care

Turntable Body

• When the turntable body is dirty or dusty, ﬁrst disconnect the AC adapter and then

wipe oﬀ the dirt and dust with a soft, dry cloth.

• Do not use benzenes, thinners, etc.

• When storing the product for a long time, disconnect the AC adapter from the

outlet and wrap the product in plastic. Do not allow the product or packaging to

become damp. The drive belt should be removed to prevent unequal stretching.

Stylus Tip

• If dirt and grime are stuck to the stylus tip, clean it

with a commercially sold brush.

• We recommend using a stylus cleaner (not

included) if the stylus tip is considerably dirty.

Clean the stylus tip by moving the brush from the

rear to the front of the stylus tip.