Acoustical Systems AXIOM Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör Acoustical Systems AXIOM herunter. Acoustical Systems AXIOM 16 Seiten.

Do fix the lateral shaft in this position by firmly

screw the lock screw into the rear end 3 mm

thread - till it can't move no further and fixes

the lateral shaft firmly in place.

Next please slide the other small cylinder onto

the free part of the short shaft. Do fix it in place

- right at the end of the shaft, so that the shaft

ends with the cylinder - with the small M3

invert Allen screw.

Balancing the AXIOM

Please look at the AXIOM's mounting board.

Around the single M5 screw, which fixes the

AXIOM on your turntable, you see 3 invert

Allen M4 screws forming a circle.

Please take the small spirit level and the T

-shaped 2.5 Allen key driver.

Do place the spirit level right on top of the

small bearing cover plate - the same plate

which covers and marks the pivot of the

AXIOM.

The spirit level is matching the diameter of the

bearing cover plate.

Assuming that your turntable is already leveled,

please use the 3 Allen screws around the center

screw to bring the spirit level to dead center.

This is usually a swift and easy procedure.

When the bubble is centered - so is your

AXIOM's bearing.

The AXIOM features a dynamic and non-

contact skating compensation. This dynamic

anti-skating is corresponding to the tangential

curve following UNI-DIN.