ClearSpan Cedar 8' Wide End Frame Kit Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Gewächshaus-Bausatz ClearSpan Cedar 8' Wide End Frame Kit herunter. ClearSpan Cedar 8' Wide End Frame Kit 9 Seiten.

CLEARSPAN
END FRAME KIT
1
INSTALL ANGLE ANCHORS
Gather the parts:
#105232 Angle Anchors
View the diagrams to measure and determine the location
of the two (2) angle anchors for the two door jambs.
1. Mark the center of the shelter's end rafter by
measuring the distance between the two ground
posts and dividing in half.
2. Measure 13-7/16" in both directions from the center
mark and push the two (2) angle anchors into the
ground leaving at least 3" exposed. Anchors must
be straight and evenly spaced. Refer to the diagram
below.
NOTE: Place the anchors so the door jamb sits
directly in line with the ground posts.
3. Continue with the information on the following page to
assemble and install the door jambs.
Ground
Post
Diagram shows position of angle anchors measured from the center mark.
6
TOP VIEW
13-7/16"
Door
Jamb
105232
Angle
Center
Anchor
Outside of Shelter
Ground Level
Drawing may show a different but similar model.
13-7/16"
Door
Jamb
105232
Angle
Anchor
Ground
Post
* DIAGRAM NOT TO SCALE.
Revision date: 05.18.10