ClearSpan Cedar 8' Wide End Frame Kit Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Gewächshaus-Bausatz ClearSpan Cedar 8' Wide End Frame Kit herunter. ClearSpan Cedar 8' Wide End Frame Kit 9 Seiten.

Seite drucken

CLEARSPAN

END FRAME KIT

™

ASSEMBLE AND ATTACH FRAME BRACES

Gather the parts:

•

Outer frame braces (#EG08W1202)

•

Middle frame brace (#EG00W1201)

•

Square head screws (#FAS8)

•

1.315" Fabric clips (#CC6212)

•

Tee Connectors (#104638)

•

Phillips head screws (#FAF25P)

•

Tek screws (#FA4482)

View the diagrams to assemble and attach the two (2)

frame braces.

1. Gather the two (2) outer frame braces and the two (2) CC6212 fabric clips. Attach each fabric clip to the end of a

frame brace using a FAS8 square head screw. Center the clip on the brace end as shown below.

2. Set assembled frame braces into position by seating the plain end against the door jambs and clipping the fabric

clip to the ground post. Verify the braces are straight and level. (Push fabric clips into the ground if needed.)

3. Once in position, secure fabric clips by installing a Tek screw through the clip and into the ground post from the

inside of the shelter. Drill a hole through the fabric clip if needed.

4. Place the EG00W1201 middle frame between the door jambs. Verify the brace is straight and level.

5. Secure the braces to the door jamb from the inside of the shelter by attaching a 104638 tee connector using

FAF25P Phillips head screws. Position tee so it does not contact the anchor stake.

Step 1

FAS8

CC6212

EG08W1202

Step 4

104638

EG08W1202

FAF25P

Step 3

Ground Post

FA4482B

Views as seen from the

inside of the shelter.

EG08W1202

Step 1 & 3

EG08W1202

EG00W1201

Ground Level

Drawing may show a different but similar model.

Frame is seen from the inside of the shelter.

EG00W1201

Step 4

Ground Level

Revision date: 05.18.10

Inside View

EG08W1202