Edgewater Networks 200EW/E Schnellstart-Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Router Edgewater Networks 200EW/E herunter. Edgewater Networks 200EW/E 7 Seiten. Networking router
Seite druckenStep 1 − Connecting the Cables
1. Connect one end of an Ethernet cable to local LAN port 4 of 200EW/E denoted by "C" in
the above diagram. Connect the other end of the cable to your computer's Ethernet port.
2. Make sure that the green LED denoted by "B" is solid green indicating that the link is up.
3. Connect one end of an Ethernet cable to the WAN port denoted by "D" and the other
end of the cable to a cable or xDSL modem.
4. Connect the PSTN line to port denoted by "F" in the above diagram.
5. Connect the regular phones or key system to ports denoted by "E" in the above diagram.
6. Plug one end of the power adapter into an AC outlet and the other end into the power
receptacle on 200 denoted by "A" in the above diagram. Make sure that the power and
status LEDs denoted by "A" and "B" in the diagram below are solid green after a short
while.
Instructions
Page 2 of 7