ClearView PowerBoards PB-NN-003 Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge ClearView PowerBoards PB-NN-003 herunter. ClearView PowerBoards PB-NN-003 15 Seiten. For nissan patrol y62 2013

Seite drucken
Fitting Instructions
Step 5
Installing running board
5.1 Open vehicle door to deploy the motor bracket. Use M6 bolts and M6 spring washers
provided, mount running board to bracket.
Do not tighten bolts fully, as you may need to adjust the position of the running board.
5.2 Open and close vehicle door to check position of power board.
Adjust position of idler and motor bracket, as well as running board if necessary and only
tighten all bolts (M6 & M8 bolts) once position is finalised.
5.3 In some cases, the 'U shape' packing washers may need to be placed in
between the front side of the bracket assembly and vehicle bracket mounting
points to correctly position Clearview Power Boards.
In these few instances, the M8 bolts used to hold top bracket to vehicle will
need to be loosened to insert the 'U shape' washer.
5.4 Once running board is correctly positioned, tighten all bolts in the board.
Cycle the board 2-3 times to allow idler/motor bracket to settle.
Secure idler motor brackets and check alignment.
Points for packing washers only if necessary (In between front side of
bracket assembly and vehicle bracket mounting point)
10
Open and Close Vehicle door
to deploy boards
Check and adjust board
position where required
clearviewaccessories.com.au
6 X M6 Bolts
6 x M6 Spring Washers