ClearView PowerBoards PB-NN-003 Installationshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge ClearView PowerBoards PB-NN-003 herunter. ClearView PowerBoards PB-NN-003 15 Seiten. For nissan patrol y62 2013

Seite drucken
Fitting Instructions
Step 3
Installing mounting brackets to vehicle
3.1 Disassemble RF, RM & RR bracket assemblies by undoing M8 nuts.
Avoid mix-up of components.
1-RF
3.2 Mount RF, RM & RR
top
brackets
to
underbody
of
vehicle
using supplied nuts, bolts
and washers. Make sure
nuts
and
bolts
tightened.
IMPORTANT
Clearview recommends a straight-edge
tool to be used when mounting the top
mounting brackets.
This provides a guide to keeping
them level and straight alongside
the vehicle.
Ensure the straight-edge tool is
aligned with the flat edge on the
mounting brackets only, not
touching the body and/or tyres etc.
3.3 Attach RF, RM & RR
lower brackets using M8
coach bolts and nuts
from Step 3.1.
Do not tighten fully, as
you may need to adjust
the
position
of
brackets later in Step 5.
8
1-RM
the
RF Top Bracket
are
2 x M8 Bolt (1 Hex, 1 Socket)
2 x M8 Flat Washer
2 x M8 Spring Washer
RF Bracket Assembly
these
3 x M8 Coach Bolts
3 x M8 Spring Washers
3 x M8 Nuts
clearviewaccessories.com.au
RM Top Bracket
2 x M8 Bolt
2 x M8 Flat Washer
2 x M8 Spring Washer
Align straight-edge tool with the
flat edge on the mounting
brackets (not the vehicle body)
*For demonstration purposes only
RM Bracket Assembly
3 x M8 Coach Bolts
3 x M8 Spring Washers
3 x M8 Nuts
1-RR
RR Top Bracket
2 x M8 Bolt
2 x M8 Flat Washer
2 x M8 Spring Washer
RR Bracket Assembly
3 x M8 Coach Bolts
3 x M8 Spring Washers
3 x M8 Nuts