Artforma S2 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Wetterstation Artforma S2 herunter. Artforma S2 12 Seiten.

s2 weather station conﬁguration

Plug the power adapter providing the power supply to the weather station to a permanent

electrical energy source (without a wall switch) with alternating voltage 120v – 230V.

Place the mirror behind the weather station next to the wireless external transmitter. There

is a cover in the rear part of the external transmitter. Slide it and open, then put 2 AAA alkali-

ne batteries inside. Make sure the channel switch is set to position 1. Put the bat-tery com-

partment cover back in place.

The weather station will start receiving a signal from the external transmitter within few

seconds. In the end, put the external transmitter in a dry and shaded place.

In the event of a power cut, repeat the device setting procedure.

Quick Set