Artforma S2 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Artforma S2. Artforma S2 12 pagina's.

s2 weather station conﬁguration

Plug the power adapter providing the power supply to the weather station to a permanent

electrical energy source (without a wall switch) with alternating voltage 120v – 230V.

Place the mirror behind the weather station next to the wireless external transmitter. There

is a cover in the rear part of the external transmitter. Slide it and open, then put 2 AAA alkali-

ne batteries inside. Make sure the channel switch is set to position 1. Put the bat-tery com-

partment cover back in place.

The weather station will start receiving a signal from the external transmitter within few

seconds. In the end, put the external transmitter in a dry and shaded place.

In the event of a power cut, repeat the device setting procedure.

Quick Set