Edic CR2 Besitzer-/Bedienerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Besitzer-/Bedienerhandbuch für Ultraschall-Schmuckreiniger Edic CR2 herunter. Edic CR2 19 Seiten. Professional restroom cleaner
Auch für Edic CR2: Benutzerhandbuch (9 seiten)

Seite drucken

1. Maintenance

GFCI MAINTENANCE:

Although the GFCI function works on its own, it is nec-

essary to test for proper function of your GFCI periodi-

cally.

To do this:

Plug your equipment to an appropriate wall plug

Press the "TEST" button on the GFCI panel

Turn on the switches for "PUMP" and "MOTOR"

(located on the switch panel on the handle).

If your motors turn on, then the GFCI is NOT working

properly- do not use the equipment until this function

has been repaired. Take the machine to an authorized

repair location.

If neither motor powers on after pressing the "TEST"

button then the GFCI is working properly.

Press the "RESET" button on the GFCI and the CR2 will

be fully functional again.

WARNING: Do not remove the grounding pin

from your power cord. Doing so will prevent

the GFCI from performing properly and can

allow dangerous operating conditions to go un-

detected. Replace power cords without ground-

ing pins immediately.

RESET

BUTTON

TEST

BUTTON

GROUNDING INSTRUCTIONS:

This piece of equipment must be grounded. Should an

electrical malfunction occur, grounding provides a path

of least resistance for electrical current- reducing the risk

of electric shock. This piece of equipment is furnished

with a cord that has a grounding conductor and ground-

ing plug. The grounded plug must only be plugged

into an appropriate outlet that is properly installed and

grounded in accordance with all local codes and ordi-

nances.

WARNING:

Connecting the equipment to an improperly grounded

outlet can result in an increased risk of electric shock. A

qualiﬁed electrician should be consulted if you are unsure

that the outlet is properly grounded. Do not modify the

plug provided with the equipment. If it will not ﬁt the

outlet, have a proper outlet installed by a qualiﬁed electri-

cian.

This appliance is designed for use on a 120-volt circuit.

The grounding plug provided looks like the plug illustrat-

ed in Figure 1. Replace the power cord if the grounding

pin is damaged or broken.

Extension cords connected to this machine should be

12 gauge, three-wire cords with three-prong plugs and

outlets. DO NOT use extension cords more than 25 feet

(7.6 m) long.

Figure 1