Edic ENDEAVOR Schnelle Handbücher - Seite 14
Blättern Sie online oder laden Sie pdf Schnelle Handbücher für Ultraschall-Schmuckreiniger Edic ENDEAVOR herunter. Edic ENDEAVOR 15 Seiten. Multi-purpose extractor
Auch für Edic ENDEAVOR: Besitzer-/Bedienerhandbuch (17 seiten)
Seite druckenINTAKE FILTER BAG:
The intake filter bag has been designed to catch larger debris before it enters the open area of the waste tank. This keeps
the dump pump intake filter from clogging too fast, allowing un-interrupted flow to the dump pump.
Locate the filter bag in the waste tank, press the cord release and pull back to loosen the drawstrings. Rinse the bag out
and place back into the tank. Tighten the cord release. Always remove the bag by loosening the cord, do not pull the
elbow out.
VACUUM INTAKE FILTER AND VACUUM SHUT OFF:
The vacuum intake filter houses the float ball which is in place to shut off airflow to the vacuum motor by floating and,
eventually, blocking the vacuum intake in the event that the recovery tank over-fills. This function keeps the vacuum
motor from taking in fluids and getting damaged. Although the filter will probably not get dirty quickly, there may be a
need to remove it and clean it if you notice debris building up. Pull down on the filter to remove it and clean as needed.
Firmly press it back into place. If it is minor build up you may use a towel to wipe off the surface of the filter.
NOTE: Daily cleaning of the intake filter bag and the pump intake filter located in the
recovery tank are essential to preserving the proper function of the pump out feature. It is
up to the operator to determine a proper cleaning schedule as workloads differ from job
to job. It is advisable to inspect the filters after the completion of each job to gauge what
an appropriate cleaning schedule would be.