dji AGRAS MG-1 Schnellstart-Handbuch - Seite 14
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Drohnen dji AGRAS MG-1 herunter. dji AGRAS MG-1 19 Seiten.
Auch für dji AGRAS MG-1: Benutzerhandbuch (3 seiten)
Seite drucken
AGRAS MG-1
Quick Start Guide
Smart Operation
The aircraft will travel along pre-designated square zig zag route after the turning Points A and B have been
recorded. The altitude difference between the aircraft and vegetation is maintained under optimal working
conditions. The aircraft will spray liquid automatically while flying along the route and stop spraying liquid while
hovering at the turning points. The length of the dotted lines, which are called Operation Gaps, can be adjusted
in the PC Assistant. It is recommended to fly in Smart Operation Mode when the spray area is large and in a
rectangular shape.
......
Ensure that Flight Mode Switch on the remote controller is toggled to the "P" position and a strong GPS signal
is present. In addition, ensure that the Operation Mode Switch on the remote controller is toggled to the "M"
position.
1. Record Points A and B in Order
Fly the aircraft to the starting point, depicted as Point A (B), hover, and then press
Button A (B) on the remote controller. The Point A (B) LED on the Spraying Status Panel
will become solid green and the Aircraft Status Indicator will blink red (green) after the
starting points have been recorded.
Update Point B by flying the aircraft to a new position and record this position. Note that if a Point A has been
updated, then Point B is also required to be updated accordingly.
It is recommended to keep the direction of Point A to B parallel to one side of the rectangular spray area for
optimal effect.
2. Select the Route
Press Back Left Button C1 or Back Right Button C2 on the remote controller to select the
operating pattern. Press Back Left Button C1 for Route L and Back Left Button C2 for Route
R. The Orientation LED on the Spraying Status Panel will blink to show that the selection has
been made. The default route pattern is Route R, if no selection has been made.
3. Adjust the Aircraft Altitude
Adjust the aircraft altitude to the desired altitude by using the throttle stick before entering Smart Operation
Mode, and the Altitude Stabilization System will start working automatically and maintain the spraying distance
between the aircraft and the vegetation.
Instructions:
a. Fly the aircraft above the vegetation and adjust the spraying distance between the
aircraft and the vegetation.
b. Confirm the desired spraying distance by observing the Height LEDs on the Spraying
Status Panel.
The optimal detection range for the spraying distance is between 1.5 to 7 meters. Always operate the aircraft above
vegetation within this range while adjusting aircraft altitude.
Ideal spraying distance should fall within the working range (2-3.5 meters) for altitude stabilization.
Refer to the User Manual for more information about the working conditions of the Altitude Stabilization System.
14
©
2016 DJI All Rights Reserved.
L5
L4
L1
B
L6
L3
L2
A
Route L
B
R1
R4
R5
......
A
R2
R3
R6
Route R
- - - - Operation Gap
Turning Point
●
Legends