Arthur Grillo WR 200-F Beschreibung und Betrieb - Seite 9
Blättern Sie online oder laden Sie pdf Beschreibung und Betrieb für Messgeräte Arthur Grillo WR 200-F herunter. Arthur Grillo WR 200-F 16 Seiten. Heat meter
Seite drucken
Start up
The heat meters WR 200 are pre-configured according to customer requirements and ready
for operation after connecting all sensors and are applying the power supply according to
wiring diagram on page 8. (Changing the configuration see page 13).
After turning on the power in the display the counters for heat quantity and flow rate are
indicated:
Heat quantity
W = 0000000.01 MWh
Flow rate
V = 00000000.2 m3
The flashing colon indicates the internal count. If the heat capacity or the flow rate = 0, the
associated colon is in position "on" or "off".
Next, the current date and time are set. Use the button to switch to the date and time
display switch:
Heat counter WR200-F
Device no. 10.657
Mon 03/06/2010
Time 12:48:22
Setting the clock
Mon 03/06/2010
Time 10:49:00 AM
after setting the value for the seconds and press the "Next value"
the display returns to the measurement mode and the clock is ticking.
:
:
previous value
9
Button to display switch
Button to display switch
Press the "Set Clock"
value higher
next value
value lower