Arthur Grillo WR 200-F 설명 및 작동 - 페이지 9

{카테고리_이름} Arthur Grillo WR 200-F에 대한 설명 및 작동을 온라인으로 검색하거나 PDF를 다운로드하세요. Arthur Grillo WR 200-F 16 페이지. Heat meter

The heat meters WR 200 are pre-configured according to customer requirements and ready

for operation after connecting all sensors and are applying the power supply according to

wiring diagram on page 8. (Changing the configuration see page 13).

After turning on the power in the display the counters for heat quantity and flow rate are

indicated:

Heat quantity

W = 0000000.01 MWh

Flow rate

V = 00000000.2 m3

The flashing colon indicates the internal count. If the heat capacity or the flow rate = 0, the

associated colon is in position "on" or "off".

Next, the current date and time are set. Use the button to switch to the date and time

display switch:

Heat counter WR200-F

Device no. 10.657

Mon 03/06/2010

Time 12:48:22

Setting the clock

Mon 03/06/2010

Time 10:49:00 AM

after setting the value for the seconds and press the "Next value"

the display returns to the measurement mode and the clock is ticking.

previous value

Button to display switch

Press the "Set Clock"

value higher

next value

value lower