dji FlameWheel 450 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Quadcopter dji FlameWheel 450 herunter. dji FlameWheel 450 8 Seiten.
Auch für dji FlameWheel 450: Benutzerhandbuch (9 seiten)

Seite drucken

Tools Needed

2.0mm Hex Wrench

Screw Glue

Nylon Cable Tie

Scissors

Diagonal Cutting Pliers

Foam Double Sided Adhesive Tape

Soldering-iron & wires

ESC Wiring

ESC

Please solder ESCs to bottom board as the up figure shows. Use any insulating method at all soldering

spots. Make sure there is no short or open circuit. Make sure the side with bonding pads is upward.

For frame and motors installation.

For fastening screws.

For binding devices and wires.

For fixing receiver, controller and other modules.

For connecting ESCs' power cables to bottom board.

Power Pads

To Battery

ESC