dji FlameWheel 450 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Quadcopters dji FlameWheel 450. dji FlameWheel 450 8 halaman.
Juga untuk dji FlameWheel 450: Panduan Pengguna (9 halaman)

Halaman Cetak

Tools Needed

2.0mm Hex Wrench

Screw Glue

Nylon Cable Tie

Scissors

Diagonal Cutting Pliers

Foam Double Sided Adhesive Tape

Soldering-iron & wires

ESC Wiring

ESC

Please solder ESCs to bottom board as the up figure shows. Use any insulating method at all soldering

spots. Make sure there is no short or open circuit. Make sure the side with bonding pads is upward.

For frame and motors installation.

For fastening screws.

For binding devices and wires.

For fixing receiver, controller and other modules.

For connecting ESCs' power cables to bottom board.

Power Pads

To Battery

ESC