Artila Matrix 604 Handbuch zur Schnellinstallation - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Desktop Artila Matrix 604 herunter. Artila Matrix 604 4 Seiten.

Network Settings

To configure the network setting by serial console, you can use

command ifconfig as followed. To check current network

configuration, you can use command ipconfig

User Account Manager

To create user group and account, you can use command

usrmgr. After user's account and password are created, user can

add authentication in telnet and ftp function by using telnetdcfg

and ftpdcfg.

Telnet Configuration

Telnet is enabled without authentication as factory default. To

disable or add authentication, please use command telnetdcfg as

follow:

FTP Configuration

FTP is enabled without authentication as factory default. To

disable or add authentication, please use command ftpdcfg as

follow:

File System

User programs and files should be saved at NandFlash. The other

folders are saved as RAMDisk therefore do not save your data to

them. Under NandFlash, you will find www folder and

autoexec.bat file. Www is for web page and autoexec.bat is for

auto run program. If you have a USB disk plugged in Matrix-604,

you will find a new folder Hard Disk available.

Serial Ports Configuration

The serial port of Matrix-604 is mapped as followed

Serial 1=> USB Console (ActiveSync)

Serial 2=> Hardware Console Port (RS-232)

Serial 3=> Matrix-604 Port 1 (RS-232/422/485)

Serial 4=> Matrix-604 Port 2 (RS-232/485)

Serial 5=> Matrix-604 Port 3 (RS-232/485)

Serial 6=> Matrix-604 Port 4 (RS-232/485)

To configure serial port settings, please use command setuart as

follow:

Serial Console Configuration

The serial console port of Matrix-604 can be disabled or

redirect to other serial port by command setconsole as follow:

GPIO Control

Matrix-604 comes with five GPIO which share the serial

console port connector. Use gpioctl command to control the

GPIO port. The I/O number starts from #1 to #5 and can be

configured as input or output independently.