DK Digital RSU-150 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Radiowecker DK Digital RSU-150 herunter. DK Digital RSU-150 16 Seiten. Digital clock radio with sd/mmc card & usb support

Seite drucken

Operation of the clock radio

Establish connections

1. Connect to the electricity supply using a properly connected power

socket (230V~/50Hz).

2. For FM reception pull out the pigtail antenna from the rear panel of the

clock radio and position it so that you have the best possible reception.

3. You can connect the analog stereo output of other devices (e.g. CD

players or cassette recorders, 3.5 mm jack) to the AUX input.

4. You can also connect an active subwoofer to the SUBWOOFER output

(3.5 mm jack).

General operation

Switching on

First switch the mains switch on the unit's rear panel to the "ON" position. The device

is now in standby mode and to the right of the display the red standby indicator goes

on. To turn the system on, press the VOLUME button on the front panel or press the

button on the remote control. The display will then be illuminated and the system

is working. You can change the mode by pressing the FUNCTION button repeatedly:

TUNER

UDISK

(USB flash media) -

Setting the time

1. To do this, press the MENU button once. "

conds. Within this period of time press the

trol. Then the hour digits will start to flash to indicate, that the time will be

displayed in 24 hour format. (If the time has elapsed without any input, the devi-

ce returns to normal operation.)

2. If you'd prefer a clock time display in 12 hour format, press the

Confirm your selection by pressing the

will start flashing.

3. Now you can enter the actual hours in the present time using the

confirm, press

4. Now you can set the minutes of the actual time using

/ENTER on the remote. The time is now saved.

Changing the volume

To increase the volume, turn the VOLUME knob in a clockwise direction. To reduce

the volume, turn the knob in the opposite direction. Alternatively, you can also

regulate the volume using the VOL + / — buttons on the remote control. To mute the

volume, press the MUTE button. Press the button again to turn the volume back on.

EQ presets

We have programmed some EQ sound settings into the system which you can call up

for the music you are playing. Press EQ repeatedly to activate the following

ROCK

JAZZ

settings:

setting will be displayed. FLAT stands for "neutral".

SD/MMC

/ENTER on the remote. Then the minute digits will start to flash.

CLASSIC

POP

, . The first time you press this button, the current

(memory card) -

CLOCK

" will then show for some se-

/ENTER button on the remote con-

/ENTER button. Then the hour digits

AUX

button.

buttons. To

. To confirm, press