DK Digital RSU-150 Manuale d'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale d'uso per Radio sveglia DK Digital RSU-150. DK Digital RSU-150 16. Digital clock radio with sd/mmc card & usb support
Operation of the clock radio
Establish connections
1. Connect to the electricity supply using a properly connected power
socket (230V~/50Hz).
2. For FM reception pull out the pigtail antenna from the rear panel of the
clock radio and position it so that you have the best possible reception.
3. You can connect the analog stereo output of other devices (e.g. CD
players or cassette recorders, 3.5 mm jack) to the AUX input.
4. You can also connect an active subwoofer to the SUBWOOFER output
(3.5 mm jack).
General operation
Switching on
First switch the mains switch on the unit's rear panel to the "ON" position. The device
is now in standby mode and to the right of the display the red standby indicator goes
on. To turn the system on, press the VOLUME button on the front panel or press the
button on the remote control. The display will then be illuminated and the system
is working. You can change the mode by pressing the FUNCTION button repeatedly:
TUNER
UDISK
-
(USB flash media) -
Setting the time
1. To do this, press the MENU button once. "
conds. Within this period of time press the
trol. Then the hour digits will start to flash to indicate, that the time will be
displayed in 24 hour format. (If the time has elapsed without any input, the devi-
ce returns to normal operation.)
2. If you'd prefer a clock time display in 12 hour format, press the
Confirm your selection by pressing the
will start flashing.
3. Now you can enter the actual hours in the present time using the
confirm, press
4. Now you can set the minutes of the actual time using
/ENTER on the remote. The time is now saved.
Changing the volume
To increase the volume, turn the VOLUME knob in a clockwise direction. To reduce
the volume, turn the knob in the opposite direction. Alternatively, you can also
regulate the volume using the VOL + / — buttons on the remote control. To mute the
volume, press the MUTE button. Press the button again to turn the volume back on.
EQ presets
We have programmed some EQ sound settings into the system which you can call up
for the music you are playing. Press EQ repeatedly to activate the following
ROCK
JAZZ
settings:
,
setting will be displayed. FLAT stands for "neutral".
SD/MMC
/ENTER on the remote. Then the minute digits will start to flash.
CLASSIC
POP
,
,
, . The first time you press this button, the current
(memory card) -
CLOCK
" will then show for some se-
/ENTER button on the remote con-
/ENTER button. Then the hour digits
7
AUX
or
button.
/
buttons. To
/
. To confirm, press