DK-TEC SP31205 Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Rasenmäher DK-TEC SP31205 herunter. DK-TEC SP31205 15 Seiten. Atv mower

Adjustment of the motor and knife pull straps

1. The motor belt must have the correct tightening at all times.

2. The mounting bolts of

belt is tight. Then the bolts are tightened again.

3. The strap

of the knife pull

Replacing knife blades

1. See the spare parts drawing on DK-TEC's website.

2. Set the mower in

3. Put

under the mower to prevent the mower from falling down and injuring .

bricks

4. Remove the two bolts and knife blades.

5. When assembling new parts, it is done above in the reverse order.

Removing tyres

1. Lower the mower all the way down by turning the handle clockwise.

2. Remove the knife height check bolt at the engine end and lift the wheel axis.

3. Remove the split and pull off the wheel .

Refer to the engine instruction manual for engine maintenance.

IMPORTANT:

parts need to be changed, only use parts that meet the manufacturer's requirements. If

that do not meet the specifications are used, it may result in a safety breach or poor operation,

thereby voiding the warranty.

STORAGE

•

Before storage, it must be ensured that the machine is clean and dry.

•

The engine and fuel tap must be in

•

Lubricate all surfaces and moving parts with a little oil to avoid rust.

•

Store the machine indoors in monitored areas during heavy rain or during

are loosened and the engine is retracted until the engine

the engine

is spring-loaded and does not

highest position to

the

need

access the blades of the knife.

"OFF" position.

adjustment.

winter months.

the

parts