DK2 Power OPC506 Montageanleitung - Seite 8
Blättern Sie online oder laden Sie pdf Montageanleitung für Chipper DK2 Power OPC506 herunter. DK2 Power OPC506 14 Seiten. 4 and 6 inch commercial chipper
Seite druckenSTEP 7: INSTALL FEED CHUTE
1. Install the feed chute on the 2 hinges. To seat the hinge pins
for the first time a rubber mallet may be used to tap the
pins into the hinges. These are tight fitting to reduce
vibration noise.
2. Close the Chute and latch it.
3. Plug the safety key shut off wire connectors together.
CONNECT WIRING CONNECTORS