Altwork SIDE-BY-SIDE MONITOR Montageanleitung Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Racks & Ständer Altwork SIDE-BY-SIDE MONITOR herunter. Altwork SIDE-BY-SIDE MONITOR 6 Seiten.

Seite drucken

The new way to work

Install & Adjust The Monitor

STEP 5:

To install the monitor mount on the Altwork Station you'll need to align

the monitor mount holes with the Altwork Station vesa plate and install four of

the Phillips screws. Make sure the screws are tight. Then use the hex key to

remove the cover on the monitor arm to adjust the friction of the monitor tilt joint.

Tip: It is best to have a second person hold the monitor mount while you place

the screws.

Hex Key

Phillips Screws

STEP 6:

Using the tools provided in the Altwork Station tool kit, tighten the bolt

until the mount will stay at the desired angle and not sag under the additional

weight of two monitors, then replace the cover.

Now rout the cords and make sure all signal and power wires are placed in a

way that they will not get pulled during any of the adjustments made to the Altwork

stations operation.