Altwork SIDE-BY-SIDE MONITOR 조립 지침 매뉴얼 - 페이지 5

{카테고리_이름} Altwork SIDE-BY-SIDE MONITOR에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Altwork SIDE-BY-SIDE MONITOR 6 페이지.

The new way to work

Install & Adjust The Monitor

STEP 5:

To install the monitor mount on the Altwork Station you'll need to align

the monitor mount holes with the Altwork Station vesa plate and install four of

the Phillips screws. Make sure the screws are tight. Then use the hex key to

remove the cover on the monitor arm to adjust the friction of the monitor tilt joint.

Tip: It is best to have a second person hold the monitor mount while you place

the screws.

Hex Key

Phillips Screws

STEP 6:

Using the tools provided in the Altwork Station tool kit, tighten the bolt

until the mount will stay at the desired angle and not sag under the additional

weight of two monitors, then replace the cover.

Now rout the cords and make sure all signal and power wires are placed in a

way that they will not get pulled during any of the adjustments made to the Altwork

stations operation.