Alva CCR102 Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Handbuch für Herd Alva CCR102 herunter. Alva CCR102 14 Seiten. Double burner butane stove
Auch für Alva CCR102: Schnellstart-Handbuch (14 seiten)

Seite drucken

The leak test must be carried out in a well-ventilated area, free

from any flames or other sources of ignition.

Connection

in assembly

Foamy

bubbles

indicate a

leak

Connections to be leak tested

Canister into Appliance

Fig.13

USING YOUR BUTANE GAS STOVE

How to ignite your butane gas stove

Turn the ignition knob counter-clockwise until you hear a 'click'

sound.

•

If the burner does not light, repeat the ignition procedure.

•

Flaring may occur during the warm up period or if the

appliance is moved during use. The flaring will stop within

one minute or when it is no longer being moved.

LEAK TEST

•

With the cartridges installed

in the stove. Open the ignitor

knobs.

•

Brush the connections (stove

to cartridges) with a solution

of equal parts soap and water

(make sure it's foamy).

•

A stream of bubbles forming

indicates a gas leak. (See

Fig.13)

•

If bubbles appear, turn the igni-

tion knob OFF, 'O', (clockwise)

and release the cartridge lock

levers to the upward position

and remove and isolate the

gas cartridges.

•

Re-install the gas cartridges,

making sure the cartridge slot

is pointing upward and retry

the leak test.

•

If you are unsure or if you

cannot install the cartridges

without a leak occuring place

the butane cartridge outside in

a cool, well-ventilated area and

contact Alva on 086 100 ALVA

(2582).

•

A leak between the stove and

canisters can lead to a fire,

which is very dangerous and

can result in extensive injury or

even death.

PRECAUTIONS

Leak test all

connections after each

canister installation.

NEVER check for

leaks with a match or

open flame

Any Butane cartridge

not connected for use

must not be stored in

the vicinity of this or

any other appliance.