Alva CCR102 Посібник - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник для Піч Alva CCR102. Alva CCR102 14 сторінок. Double burner butane stove
Також для Alva CCR102: Посібник із швидкого старту (14 сторінок)
Друкувати сторінкуThe leak test must be carried out in a well-ventilated area, free
from any flames or other sources of ignition.
Connection
in assembly
Foamy
bubbles
indicate a
leak
Connections to be leak tested
Canister into Appliance
Fig.13
USING YOUR BUTANE GAS STOVE
How to ignite your butane gas stove
Turn the ignition knob counter-clockwise until you hear a 'click'
sound.
•
If the burner does not light, repeat the ignition procedure.
•
Flaring may occur during the warm up period or if the
appliance is moved during use. The flaring will stop within
one minute or when it is no longer being moved.
LEAK TEST
•
With the cartridges installed
in the stove. Open the ignitor
knobs.
•
Brush the connections (stove
to cartridges) with a solution
of equal parts soap and water
(make sure it's foamy).
•
A stream of bubbles forming
indicates a gas leak. (See
Fig.13)
•
If bubbles appear, turn the igni-
tion knob OFF, 'O', (clockwise)
and release the cartridge lock
levers to the upward position
and remove and isolate the
gas cartridges.
•
Re-install the gas cartridges,
making sure the cartridge slot
is pointing upward and retry
the leak test.
•
If you are unsure or if you
cannot install the cartridges
without a leak occuring place
the butane cartridge outside in
a cool, well-ventilated area and
contact Alva on 086 100 ALVA
(2582).
•
A leak between the stove and
canisters can lead to a fire,
which is very dangerous and
can result in extensive injury or
even death.
6
PRECAUTIONS
Leak test all
connections after each
canister installation.
NEVER check for
leaks with a match or
open flame
Any Butane cartridge
not connected for use
must not be stored in
the vicinity of this or
any other appliance.