3M Digital Projector X64 Handbuch zur Produktsicherheit - Seite 12

Blättern Sie online oder laden Sie pdf Handbuch zur Produktsicherheit für Projektor 3M Digital Projector X64 herunter. 3M Digital Projector X64 15 Seiten. Technical
Auch für 3M Digital Projector X64: Spezifikationen (2 seiten), Schnelles Einrichten (1 seiten), Benutzerhandbuch (16 seiten), Broschüre & Specs (2 seiten)

Seite drucken

3M Digital Projector X64 Handbuch zur Produktsicherheit

For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.

Also, do not install an old or previously used lamp.

1. Remove lamp access door: Loosen the lamp door screw (marked by arrow) (1) and then slide

the lamp door to the side to remove it. (2)

2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws (marked by

arrow) . (3)

All lamp module screws must be loosened. These screws are self-containing screws that

cannot be removed from the lamp module or access door.

3. Remove lamp module: Slowly pick up the lamp module by the handles. (4)

4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.

Tighten the lamp module retaining screws (3) to secure the lamp module in place.

Optional Lamp: 78-6969-9917-2 (Contact 3M Customer Service.)

Reset the lamp operation hours. See "Reset Lamp Hours" for details.

(1) Screw

Note

(2) Lamp access door

3M™ Multimedia Projector X64 Product Safety Guide

(3) Screws

(4) Handle