- ページ 12

プロジェクター 3M Digital Projector X64のPDF 製品安全マニュアルをオンラインで閲覧またはダウンロードできます。3M Digital Projector X64 15 ページ。 Technical
3M Digital Projector X64 にも：仕様 (2 ページ), クイックセットアップ (1 ページ), 取扱説明書 (16 ページ), パンフレット＆スペック (2 ページ)

ページを印刷する

For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.

Also, do not install an old or previously used lamp.

1. Remove lamp access door: Loosen the lamp door screw (marked by arrow) (1) and then slide

the lamp door to the side to remove it. (2)

2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws (marked by

arrow) . (3)

All lamp module screws must be loosened. These screws are self-containing screws that

cannot be removed from the lamp module or access door.

3. Remove lamp module: Slowly pick up the lamp module by the handles. (4)

4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.

Tighten the lamp module retaining screws (3) to secure the lamp module in place.

Optional Lamp: 78-6969-9917-2 (Contact 3M Customer Service.)

Reset the lamp operation hours. See "Reset Lamp Hours" for details.

(1) Screw

Note

(2) Lamp access door

3M™ Multimedia Projector X64 Product Safety Guide

(3) Screws

(4) Handle