aion Lab L4 BASS PREAMP Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch für Verstärken aion Lab L4 BASS PREAMP herunter. aion Lab L4 BASS PREAMP 20 Seiten.

USAGE

The L4 Bass Preamp has the following controls:

Channel 1

• Deep (toggle switch) boosts bass frequencies at 100 Hz when on. When off, the signal remains

roughly flat.

• Treble, Mid and Bass form a standard Fender-style 3-band passive EQ.

• Volume controls the amount of gain in the first stage, before the EQ and drive section.

Channel 2

• Deep (toggle switch) boosts bass frequencies at 100 Hz when on. When off, the signal remains

roughly flat.

• Volume controls the amount of gain in the first stage, before the EQ and drive section.

• Treble and Bass form a standard 2-band Baxandall control. Each band is flat at the 12:00 position,

and can either cut (CCW) or boost (CW).

• Mid boosts (CCW) or cuts (CW) the midrange frequency selected by the Frequency control.

• Frequency selects the frequency that will be boosted or cut by the Mid control, from 50 Hz at full

CCW to 3.2kHz at full CW.

Both channels

• Master sets the output volume after the drive section of the preamp.

• Limit sets the threshold of the compressor at the end of the circuit.

• Comp (toggle) engages or disengages the compressor.

L4 BASS PREAMP