aion Lab L4 BASS PREAMP Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Penguat aion Lab L4 BASS PREAMP. aion Lab L4 BASS PREAMP 20 halaman.

USAGE

The L4 Bass Preamp has the following controls:

Channel 1

• Deep (toggle switch) boosts bass frequencies at 100 Hz when on. When off, the signal remains

roughly flat.

• Treble, Mid and Bass form a standard Fender-style 3-band passive EQ.

• Volume controls the amount of gain in the first stage, before the EQ and drive section.

Channel 2

• Deep (toggle switch) boosts bass frequencies at 100 Hz when on. When off, the signal remains

roughly flat.

• Volume controls the amount of gain in the first stage, before the EQ and drive section.

• Treble and Bass form a standard 2-band Baxandall control. Each band is flat at the 12:00 position,

and can either cut (CCW) or boost (CW).

• Mid boosts (CCW) or cuts (CW) the midrange frequency selected by the Frequency control.

• Frequency selects the frequency that will be boosted or cut by the Mid control, from 50 Hz at full

CCW to 3.2kHz at full CW.

Both channels

• Master sets the output volume after the drive section of the preamp.

• Limit sets the threshold of the compressor at the end of the circuit.

• Comp (toggle) engages or disengages the compressor.

L4 BASS PREAMP