3M Multimedia Projector X68 Sicherheitshandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Sicherheitshandbuch für Projektor 3M Multimedia Projector X68 herunter. 3M Multimedia Projector X68 13 Seiten. 3m digital projector specifications
Auch für 3M Multimedia Projector X68: Spezifikationen (2 seiten), Schnellstart-Handbuch (4 seiten)
Seite drucken
For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.
Also, do not install an old or previously used lamp.
1. Remove lamp access door: The lamp access door is located on the bottom of the machine.
Please unhook the claws of the lamp door (1), and remove the lamp door.
2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws
. (3)
All lamp module screws must be loosened. These screws are self-containing screws that
cannot be removed from the lamp module or access door.
3. Remove lamp module: Slowly pick up the lamp module by the handles. (4)
4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.
Tighten the lamp module retaining screws (3) to secure the lamp module in place.
Optional Lamp: XX-XXXX-XXXX-X (Contact 3M customer Service.)
Insert the hinge tabs (5) on the bottom of the lamp access door, then
two claws (6) to fix the lamp door.
Reset the lamp operation hours. See "Reset Lamp Hours" for details.
(2)Lamp access door
(1)Claws
10
√ Note
√ Note
√ Note
(4) Handles
(3)Screws
(marked by arrow)
3M™ Digital Projector X68 Product Safety Guide
push the center point of
(5)Tabs
(6)Center point
of claws
(2)
© 3M 2005