3M Multimedia Projector X68 안전 매뉴얼 - 페이지 10

{카테고리_이름} 3M Multimedia Projector X68에 대한 안전 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M Multimedia Projector X68 13 페이지. 3m digital projector specifications
3M Multimedia Projector X68에 대해서도 마찬가지입니다: 사양 (2 페이지), 빠른 시작 매뉴얼 (4 페이지)

페이지 인쇄

For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.

Also, do not install an old or previously used lamp.

1. Remove lamp access door: The lamp access door is located on the bottom of the machine.

Please unhook the claws of the lamp door (1), and remove the lamp door.

2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws

. (3)

All lamp module screws must be loosened. These screws are self-containing screws that

cannot be removed from the lamp module or access door.

3. Remove lamp module: Slowly pick up the lamp module by the handles. (4)

4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.

Tighten the lamp module retaining screws (3) to secure the lamp module in place.

Optional Lamp: XX-XXXX-XXXX-X (Contact 3M customer Service.)

Insert the hinge tabs (5) on the bottom of the lamp access door, then

two claws (6) to ﬁx the lamp door.

Reset the lamp operation hours. See "Reset Lamp Hours" for details.

(2)Lamp access door

(1)Claws

√ Note

(4) Handles

(3)Screws

(marked by arrow)

3M™ Digital Projector X68 Product Safety Guide

push the center point of

(5)Tabs

(6)Center point

of claws

(2)