DNP DS-ID400 Einstellungen Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Einstellungen Handbuch für Drucker DNP DS-ID400 herunter. DNP DS-ID400 7 Seiten. Digital photo printer
Auch für DNP DS-ID400: Wie man einrichtet (2 seiten), Setup-Handbuch (10 seiten), Einstellungen Handbuch (10 seiten)

Seite drucken

Creating a Template

These procedures describe how to create a template file

structure using the PNG Export Tool.

Before Using a Template

Create logo image design data

Run the PNG Export Tool to convert the template file

Save the template to an expansion SD card, and insert the

card in the printer

Select the logo you want to use using the printer's menu

The created template is now ready for use

Creating Images

Create logo image design data as follows.

The size of images to be used for templates is determined

by print size. Create image data with the following sizes.

For the UPC-X34 series: 1512 (W) × 1112 (H) pixels

For the UPC-X46 series: 1664 (W) × 2440 (H) pixels

PNG Format

24-bit RGB + alpha channel (semi-transparent images are

supported)

Note

Up to 52 pixels from the top, bottom, left and right edges

of the above image sizes may not be printed, so avoid

placing logos or text in these regions if you need them to

print.

Use guidelines in your image creating software to confirm

proper object placement.

Printable area

(example: 1560 × 2336)

52 pixels

Starting the PNG Export Tool

Double click

(DSIDPhotoUtility.exe).

The [DS ID Photo Utility] screen appears.

Select the target printer from the [Printer] pull-down

menu.

Click the [Browse Folder] button, and select the save

destination.

The following folders are automatically created during

file saving:

For the DS-ID400

DNP\DSID400

If you want to make the template directly available for

use, select the drive letter of the expansion SD card as

the save destination.

52 pixels

Image size (example:

1664 × 2440)

Paper size (example:

102 × 152 mm (4 × 6

inches))

52 pixels

Creating a Template