DockCraft DockSider Montage, Installation, Einrichtung und Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Montage, Installation, Einrichtung und Betriebsanleitung für Bootsausrüstung DockCraft DockSider herunter. DockCraft DockSider 12 Seiten.

Seite drucken

Then attach the mount from above to the RS 4 or 7 (depending on your Infinity Dock) – Accessory Bracket

with the hardware provided to the Accessory Connector purchased from your ShoreMaster Dealer.

Insert the Lock Washer then Flat Washer on the Screw, then insert the screw through the mounting angle

and Connector Bracket and secure with Flange nut provided with the Connector Bracket. 4 places.

Assure that the Mount is perpendicular to the connector.

Once the mounts (qty. 2) are assembled, you are ready to mount to your dock.

Mounting illustration does not show the mounts attached to the Connector.

Note: Be sure to avoid the access holes on the bottom of the dock frame when tightening the T – Handle

Shore Master Mount Installation - continued

Install both mounts on your ShoreMaster dock as follows:

Position the Dock Mounts on your Dock and Secure with T Handle

On Center

When mounted, the distance between mounts should be,

- Dockside Unit - 32 inches apart (center to center)

- Waterside Unit - 26 ½ inches apart (center to center)

Page 7 of 12