DockCraft DockSider Інструкція зі збирання, встановлення, налаштування та експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція зі збирання, встановлення, налаштування та експлуатації для Човнове спорядження DockCraft DockSider. DockCraft DockSider 12 сторінок.
Друкувати сторінкуThen attach the mount from above to the RS 4 or 7 (depending on your Infinity Dock) – Accessory Bracket
with the hardware provided to the Accessory Connector purchased from your ShoreMaster Dealer.
Insert the Lock Washer then Flat Washer on the Screw, then insert the screw through the mounting angle
and Connector Bracket and secure with Flange nut provided with the Connector Bracket. 4 places.
Assure that the Mount is perpendicular to the connector.
Once the mounts (qty. 2) are assembled, you are ready to mount to your dock.
Mounting illustration does not show the mounts attached to the Connector.
Note: Be sure to avoid the access holes on the bottom of the dock frame when tightening the T – Handle
Shore Master Mount Installation - continued
Install both mounts on your ShoreMaster dock as follows:
Position the Dock Mounts on your Dock and Secure with T Handle
On Center
When mounted, the distance between mounts should be,
- Dockside Unit - 32 inches apart (center to center)
- Waterside Unit - 26 ½ inches apart (center to center)
Page 7 of 12