AkoTec Weiser Protect Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationshandbuch für Sonnenkollektor AkoTec Weiser Protect herunter. AkoTec Weiser Protect 20 Seiten.

.
Mounting the vacuum tubes
-
put on gloves (cotton)
-
spray the pipe penetration and the lower part of the
tube with a washing-up liquid mixture
-
mount tube into the foot part with a slight turning
movement
-
insert the vacuum tube into the receptacles provided in the
collector while rotating it.
-
insert the tube into the collector / sleeve until the
tube protection rubber is in contact and pull it
back approx. 5 mm f rom the collector.
-
check the tight f it of the tube by gently pulling
of the tube
-
all tubes must sit in one line in the collector
Hint:
To prevent overheating during installation of the system,
do not insert the vacuum tubes until the very end, after
f illing and the pressure and leakage test.
For roofs with southward deviation or perpendicular
mounting, turn absorber towards the sun.
page 10