AkoTec Weiser Protect 설치 매뉴얼 - 페이지 10

{카테고리_이름} AkoTec Weiser Protect에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AkoTec Weiser Protect 20 페이지.

Mounting the vacuum tubes

put on gloves (cotton)

spray the pipe penetration and the lower part of the

tube with a washing-up liquid mixture

mount tube into the foot part with a slight turning

movement

insert the vacuum tube into the receptacles provided in the

collector while rotating it.

insert the tube into the collector / sleeve until the

tube protection rubber is in contact and pull it

back approx. 5 mm f rom the collector.

check the tight f it of the tube by gently pulling

of the tube

all tubes must sit in one line in the collector

Hint:

To prevent overheating during installation of the system,

do not insert the vacuum tubes until the very end, after

f illing and the pressure and leakage test.

For roofs with southward deviation or perpendicular

mounting, turn absorber towards the sun.

page 10